RO Titlu proiect: Radar aerian cu sistem de alarma
Aplicatia pe care am realizat-o consta intr-o reprezentare a unui sistem de detectie folosind senzorul ultrasonic HC-SR04 pentru a detecta obstacole de la diverse distante(pana la 10, intre 10-20cm, peste 20cm) si a aprinde conform distantei masurate un LED care sa afirme aceasta distanta atat fizic pe breadboard cat si in interfata din LabView. Pentru a folosi cat mai mult din ceea ce poate oferi acest senzor si a imita cat mai bine un radar aerian am atasat senzorul ultrasonic la un servo motor SG90 care se poate roti in raza 0-180 grade si care imi permite o apropiere reala de adevaratul sistem de detectie aerian folosit in practica. Pentru a marca o apropiere mai mica de 10cm de senzor am atasat de asemenea si un buzzer care este declansat concomitent cu becul de culoare rosie si cel albastru.
EN Project title: Aerial radar with alarm system
The application I made consists in a representation of a detection system using the ultrasonic sensor HC-SR04 to detect obstacles from various distances (up to 10, between 10-20cm, over 20cm) and to light according to the distance measured an LED to state this distance both physically on the breadboard and in the LabView interface. In order to use as much as possible of what this sensor can offer and to imitate as best as possible an aerial radar, I attached the ultrasonic sensor to an SG90 servo motor that can rotate in the 0-180 degree radius and that allows me a real approach to the real system used for aerial detection in practice. To mark an approach less than 10 cm from the sensor, I also attached a buzzer that is triggered simultaneously with the red and blue LEDs.